• Office  Hours:  Mon - Fri: 8:00am - 5:00pm | Sat: Closed | Sun: Closed || Service Hours: 24Hrs

Medina Floor Stripping and Waxing
Professional VCT Floor Stripping and Waxing in Medina, Ohio

FLOOR STRIPPING AND WAXING IN MEDINA, OHIO

Cheetah Floor Systems, Inc. provides commercial floor stripping and waxing in Medina, Ohio. VCT flooring requires proper maintenance to preserve its resilience and luster. With our customized floor maintenance program for commercial facilities in Medina, OH we can protect your VCT floor and keep it looking like new.

We can remove your VCT floor's old sealer and finish, reseal it with a high-quality all in one sealer and finish and buff the surface to a deep shine. This sealer and glossy finish will extend the wear of your vinyl floor, reduce scuff marks and scratches and guard against soil penetration and abrasion.

Our superior commercial and industrial floor cleaning methods, floor care techniques, professional grade floor sealers and finishes will exceed your high standards of facility cleanliness and floor appearance.

COMMERCIAL FLOOR REFINISHING IN MEDINA, OHIO

Cheetah Floor Systems, Inc.  provides professional VCT floor care solutions for businesses in Medina, Ohio. Whether you are looking for VCT floor maintenance in schools, in a hospital, a supermarket, or in an office and factory; you can rest assured that we will have the right floor care solution for your commercial tile floors in Medina, OH.
  • Floor Cleaning Services
  • Routine Floor Maintenance
  • Deep Scrub and Recoating
  • Preventive Floor Maintenance
  • Floor Stripping Service
  • Floor Stripping and Sealing
  • Floor Stripping and Waxing
  • VCT Stripping, Sealing and Waxing
  • Commercial Floor Refinishing
  • Waxed Tile Floor Buffing
  • Vinyl Tile Floor Burnishing
  • Top-Scrub and Recoat
Following your VCT flooring’s recommended maintenance program improves its appearance and protects the floor by reducing wear and abrasion, which ultimately increases the service life of the flooring. It also contributes to a safe and healthy environment by minimizing potential slip and fall hazards and improving indoor air quality and cleanliness in your building. Walk-off mats, sweeping, mopping, polishing, and buffing protect more than just the floor – they protect the building owner’s investment as well.

TYPES OF COMMERCIAL FLOORS SERVICED IN MEDINA

Vinyl Composite Tile (VCT) is by far the most common type of hard surface flooring found in commercial buildings throughout Medina, Ohio. The specific maintenance program and the type of floor finish applied to your VCT floors will depend on the appearance and protection desired as well as your budget. Based on the look and protection desired we can finish your VCT floors in matte gloss, semi-gloss and high gloss (wet look). Our floor sealers and finishes are designed for low, medium and high traffic so you get the perfect floor finish and protection for your floors.

In some environments, such as nursing homes and geriatric wards, matte gloss is preferable to high gloss. Elderly and Alzheimer's patients often perceive a high-gloss floor as slippery due to lack of depth perception and have been know to fall, not because the floor was slippery but simply because they thought it was.

A matte-gloss finish protects the floor the same as other finishes but is safer in these specific environments.
 NON-RESILIENT
  • Concrete Flooring
  • Ceramic Tile
  • Terrazzo Floors
  • Quarry Tile
  • Natural Stone
  • Marble Floors
  • Granite Floors
  • Limestone
RESILIENT
  • Vinyl Composition Tile (VCT)
  • Luxury Vinyl Tile
  • Linoleum
  • Asphalt Tile
  • Rubber Flooring
  • Synthetic Floors
  • Conductive Flooring

STATIC DISSIPATIVE FLOOR FINISH

In addition to traditional floor refinishing, Cheetah Floor Systems, Inc. also provides Static Dissipative Floor Coating (SDFC) in Medina and Akron, Ohio. In production facilities where electrostatic charges can present problems, you can not use just any floor coating. Static Dissipative Floor Coating has to be used which dissipates the charges from static electricity, evenly throughout the floor.

This type of floor finishing is a must have in any facility in the electronic, telecommunications, or microchip industries. This is the most advanced polymer floor coating to effectively control electrostatic discharge (ESD) on all hard surfaces. ESD floor coating is essential in the dissipation of charge from static electricity. Our floor finish meets and exceeds the demanding needs of the medical, electronic, microchip and telecommunications industries. We will use premium, high solids floor finish that can be maintained with a variety of methods and is formulated to be extra durable, resist scuff marking, and produce an immediate wet-look floor.